So as you may recall my wife and I have gotten really into bourbon. On our tour of the Bourbon Trail we tasted a lot of different bourbons and ryes and we saw a lot of different bottles. The coolest bottle by far was from Willett. Their flagship bourbon comes in a bottle shaped like their still.
But what do you do with that very cool bottle once it’s empty? Turns out they can be made into lamps. While I’m not a very crafty person I figured it was worth a try.
So here’s how it’s done.
I started with a trip to the local hardware store, You can get a basic lamp kit most anywhere but I did have to order the bit for drilling the glass. Once that arrived I assembled all the parts and got to work.
Drilling a hole in the bottom of the bottle seemed tricky. I practiced on an empty Four Roses bottle just to get the hang of it. Turns out it’s fairly time consuming. You have to constantly drip water where you’re drilling to keep things running smoothly. But eventually the bit went through and the bottle was intact.
This meant it was time to try the Willett bottle. The long, narrow neck made keeping things steady and level somewhat challenging but just ten minutes later it was all done.
Next came wiring the lamp. I had spent some time trying to figure out what to do with the wire that would run up the middle of the lamp. While a nice cloth covered cord wasn’t too unattractive if left exposed I really wanted something nicer.
So, after drilling through the stopper I threaded the pipe and then the wire. Wiring up the socket is very straight forward. Once everything was made snug came the moment of truth. Sure enough it lit up right away.
With lamp assembled and working, all I had to find a shade. This was no simple matter. After a lot of searching I settled on a smaller shade made of copper colored silk. A final tweak had to be made because the 10 inch harp that came with the kit was too tall . One last quick trip to the hardware store and I had an 8 inch harp that worked perfectly.
While it took more than a month to go from the impetus to the final product, all in all it wasn’t that much work. So next time the crafty urge strikes me I might just find myself walking into a hardware store again.